Many rooms, projectors, and TVs across D11 are equipped with an AirTame casting device. These devices help you to show a device's screen up on a larger platform for the entire room to see as well. The following instructions outline how you can connect to these devices using a D11 Windows device using a protocol commonly referred to as "Miracast". You will typically use this with a Windows 10 Laptop or occasionally an Android device. For instructions on how to cast from other types of devices please see the linked articles below

• Using an AirTame with D11 Apple Device (iOS or macOS)
• Using an AirTame with D11 Chromebook

Here is your step by step guide for how to present from a Windows device

1. Ensure you have your D11 Windows 10 PC and you are in the same room as the AirTame device and the screen you want to present to.
   • Having your D11 device is important because you will only be able to connect through the "D11_Data" network that is pre-installed on your device
2. At the same time, press the Windows + P keys.
3. You will see the option to "Connect to a wireless display", click that.
4. Next, you can either click choose "Select screen" OR press the Windows + K buttons to select the screen you wish to connect to.
5. Choose the AirTame you want to connect to by clicking on its name (ex: Freedom AirTame - Room 105).
6. You should then be prompted to enter a PIN code that should show on the screen you are casting to. On your computer, enter a 4- or 8-digit PIN that you see on the screen that your Airtame is connected to.
   • This PIN code will be required every time the Airtame reboots but not when the scheduled Sleep Mode ends. 

Here is your guide for how to present from an Android device

The steps to mirror from your Android might vary depending on your device. The most common ways are either by using "Smart view", "Screen mirroring", "Quick Connect" or through the Cast settings on your phone.

You should then be prompted to enter a PIN code that should show on the screen you are casting to. On your computer, enter a 4- or 8-digit PIN that you see on the screen that your Airtame is connected to.

• This PIN code will be required every time the Airtame reboots but not when the scheduled Sleep Mode ends.

As always the D11 Technical and Support Services team is ready to answer any questions you have. Feel free to reach out to us by phone at 520.2211, or by submitting an IT Support Ticket.

This article was adapted from "Present to Airtame with Miracast". (2021). Retrieved from http://help.airtame.com/en/articles/3823854-present-to-airtame-with-miracast